top of page

HOME
PRODUCTS
BRANDS
MATRIX
REPAIR SERVICES
PROMOS
CLEARANCE
CONTACT US

Use tab to navigate through the menu items.

HP ULTRA SPEEDS N FEEDS (1).png

EMPT CA (4)_edited_edited_edited_edited.

EMPT CA (4)_edited_edited_edited_edited.

EMPT CA (4)_edited_edited_edited_edited.

To play, press and hold the enter key. To stop, release the enter key.

High Performance Ultra HTAS High Temp Alloys and Stainless Ball Nose Solid Carbide End

High Performance Ultra HTAS High Temp Alloys and Stainless Ball Nose Solid Carbide End Mill

High Performance Ultra HTAS High Temp Alloys and Stainless Ball Nose Solid Carbide End Mill

High Performance Ultra HTAS High Temp Alloys and Stainless Ball Nose Solid Carbide End

High Performance Ultra HTAS High Temp Alloys and Stainless Ball Nose Solid Carbide End Mill

High Performance Ultra HTAS High Temp Alloys and Stainless Ball Nose Solid Carbide End Mill

KEY BENEFITS

Honed Cutting Edges: All tools are honed to extend tool life

and improve cutting performance

Solid Carbide Construction

Manufactured from Ultra Premium Micrograin Solid Carbide

Broad Application Range

Suitable for slotting, profiling, side milling, and light roughing in CNC and

manual milling setups.

Wide Range of Sizes & Configurations:

Cutting diameters from 1/4" to 1"
Length of Cut from 3/8" to 3-1/4"

Geometries for Every Application - Centre Cutting:

Ball Nose End – 4 & 6 Flute

Coating Options:

ALL4 Coated – Provides low residual stress, high heat and crack resistancefor extended tool life in harder materials or high-speed applications

Series / High Performance Ultra HTAS Series / Ball Nose End

BUILT FOR HEAT. ENGINEERED FOR EXTREMES.

The High Performance Ultra HTAS (High Temp Alloys & Stainless) Series is built to conquer extreme heat and work-hardening materials. Advanced geometry and high-performance coating deliver superior thermal stability, longer tool life, and consistent precision in demanding production. Engineered for exceptional wear resistance, reduced deflection, and optimized chip control in stainless steels and high-temperature superalloys.

1" 4FL REG 1-3/4LOC 4-1/2OAL SQ ALL4 SC EM HTAS

1" 4FL REG 1-3/4LOC 4-1/2OAL .015CR ALL4 SC EM HTAS

1" 4FL REG 1-3/4LOC 4-1/2OAL .030CR ALL4 SC EM HTAS

1" 4FL REG 1-3/4LOC 4-1/2OAL .060CR ALL4 SC EM HTAS

1" 4FL REG 1-3/4LOC 4-1/2OAL .090CR ALL4 SC EM HTAS

1" 4FL REG 1-3/4LOC 4-1/2OAL .125CR ALL4 SC EM HTAS

1" 4FL REG 1-3/4LOC 4-1/2OAL .190CR ALL4 SC EM HTAS

1" 4FL REG 1-3/4LOC 4-1/2OAL .250CR ALL4 SC EM HTAS

1" 5FL REG 1-3/4LOC 4-1/2OAL SQ ALL4 SC EM HTAS

1" 5FL REG 1-3/4LOC 4-1/2OAL .015CR ALL4 SC EM HTAS

1" 5FL REG 1-3/4LOC 4-1/2OAL .030CR ALL4 SC EM HTAS

1" 5FL REG 1-3/4LOC 4-1/2OAL .060CR ALL4 SC EM HTAS

1" 5FL REG 1-3/4LOC 4-1/2OAL .090CR ALL4 SC EM HTAS

1" 5FL REG 1-3/4LOC 4-1/2OAL .125CR ALL4 SC EM HTAS

1" 5FL REG 1-3/4LOC 4-1/2OAL .190CR ALL4 SC EM HTAS

1" 5FL REG 1-3/4LOC 4-1/2OAL .250CR ALL4 SC EM HTAS

BALL NOSE END | ALL4 Coated

Stock
ON

Ball Nose End | 4 & 6 Flute - Fractional

Used for plunging, pocketing, slotting, ramping & profiling applications.
Available in ALL4 Coated.

Untitled design.png

Untitled design.png

D
Cutter
Ø

d
Shank
Ø

l1
L.O.C
Length Of Cut

L
O.A.L
Overall Length

End
Face

4FL - ALL4 Coated

SKU - 4FL

List
Price

6FL - ALL4 Coated

SKU - 6FL

Stock
ON

Stock
MB

List
Price

Stock
ON

Stock
MB

All
Metric
Fractional

CA$0

CA$959

1-1/2" OAL
2" OAL
2-1/2" OAL
2-3/4" OAL
3" OAL
3-1/16" OAL
3-1/8" OAL
3-1/4" OAL
3-1/2" OAL
4" OAL
5" OAL
6" OAL
7" OAL
8" OAL
9" OAL
10" OAL
12" OAL
38mm OAL
50mm OAL
63mm OAL
70mm OAL
75mm OAL
88mm OAL
100mm OAL
125mm OAL
150mm OAL

2 Flute
3 Flute
4 Flute
5 Flute
6 Flute
7 Flute

Uncoated
TiALN Coated
ZrN Coated
DLC Coated
ALL4 Coated
TiN Coated

.010" Corner Radius
.015" Corner Radius
.020" Corner Radius
.030" Corner Radius
.060" Corner Radius
.090" Corner Radius
.120" Corner Radius
.125" Corner Radius

Square End
Ball Nose End
Square Double End
Ball Nose Double End
Long Reach Neck Relief
Engraver
Double End

AlumiMax
MaxCarb GP
MaxCarb HP
MaxCarb HP Ultra

Round Shank
Weldon Shank

MAX-996024

1" 7FL REG 1-3/4LOC 4-1/2OAL SQ ALL4 SC EM HTAS
PriceC$458.18
MAX-996025

1" 7FL REG 1-3/4LOC 4-1/2OAL .015CR ALL4 SC EM HTAS
PriceC$458.18
MAX-996026

1" 7FL REG 1-3/4LOC 4-1/2OAL .030CR ALL4 SC EM HTAS
PriceC$458.18
MAX-996027

1" 7FL REG 1-3/4LOC 4-1/2OAL .060CR ALL4 SC EM HTAS
PriceC$458.18
MAX-996028

1" 7FL REG 1-3/4LOC 4-1/2OAL .090CR ALL4 SC EM HTAS
PriceC$458.18
MAX-996029

1" 7FL REG 1-3/4LOC 4-1/2OAL .125CR ALL4 SC EM HTAS
PriceC$458.18
MAX-996030

1" 7FL REG 1-3/4LOC 4-1/2OAL .190CR ALL4 SC EM HTAS
PriceC$458.18
MAX-996031

1" 7FL REG 1-3/4LOC 4-1/2OAL .250CR ALL4 SC EM HTAS
PriceC$458.18
MAX-996032

1/4" 4FL STUB 3/8LOC 2OAL SQ ALL4 SC EM HTAS
PriceC$29.62
MAX-996033

1/4" 4FL STUB 3/8LOC 2OAL .015CR ALL4 SC EM HTAS
PriceC$29.62
MAX-996034

1/4" 4FL STUB 3/8LOC 2OAL .030CR ALL4 SC EM HTAS
PriceC$29.62
MAX-996035

1/4" 4FL STUB 3/8LOC 2OAL .060CR ALL4 SC EM HTAS
PriceC$29.62

3

...424

EMPT CA (4)_edited_edited_edited_edited.

EMPT CA (4)_edited_edited_edited_edited.

To play, press and hold the enter key. To stop, release the enter key.

HP BN (1)_edited

HP LR SQ (1)_edited

HP SE (1)_edited

HP BN (1)_edited

HP LR SQ (1)_edited

HP SE (1)_edited

HIGH PERFORMANCE. PRECISION. STABILITY.

The High Performance Series is engineered for superior performance in demanding applications, featuring variable pitch geometry to significantly reduce chatter and vibration. All HP Series undergo a unique honing process to improve edge integrity and finish quality with specially designed core and heel geometry to enhance rigidity and minimize tool deflection for consistent, accurate results.

4 & 5 Flute
TiALN Coated
Square & Corner Radius End
Ball Nose
Long Reach Neck Relief

To play, press and hold the enter key. To stop, release the enter key.

HP ULTRA (1)_edited

HP ULTRA (1)_edited

HP ULTRA FAM_edited

HP ULTRA (1)_edited

HP ULTRA (1)_edited

HP ULTRA FAM_edited

ULTIMATE TOOL LIFE. MAXIMUM PERFORMANCE.

The High Performance Ultra & HEM Series combines advanced engineering to deliver maximum tool life, precision and productivity. Built for the most demanding production environments. Manufactured to ensure exceptional wear resistance and cutting performance. HEM (High Efficiency Milling) Series for Dynamic and Trochoidal Milling.

4, 5, 6 & 7 Flute
TiALN & ALL4 Coated
Square & Corner Radius End
Ball Nose
Ultra Premium Micrograin Carbide

To play, press and hold the enter key. To stop, release the enter key.

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

HP Ultra HTAS High Temp Alloys & Stainless Superalloys Square and Corner Radius End, Ball Nose End A

BUILT FOR HEAT. ENGINEERED FOR EXTREMES.

The High Performance Ultra HTAS (High Temp Alloys & Stainless) Series is built to conquer extreme heat and work-hardening materials. Advanced geometry and high-performance coating deliver superior thermal stability, longer tool life, and consistent precision in demanding production. Engineered for exceptional wear resistance, reduced deflection, and optimized chip control in stainless steels and high-temperature superalloys.

4, 5, 6 & 7 Flute, ALL4 Coated
Square & Corner Radius, Ball Nose End
w/ Chipbreaker & w/o Chipbreaker
Ultra Premium Micrograin Carbide

To play, press and hold the enter key. To stop, release the enter key.

GP BN_edited

GP DSE_edited

GB Drill Mill (12)_edited

VERSATILITY meets PERFORMANCE & DURABILITY.

The General Purpose Series embodies our commitment to quality and performance in general-purpose milling designed to excel across a wide range of materials. Precision Grinding with high quality surface finishes for maximum tool life, delivering cost-effective, reliable and economical solutions for everyday general-purpose milling and machining applications.

2, 3 & 4 Flute
Uncoated, TiALN & TiN Coated
Square & Ball Nose End
Double Square End & Double Ball Nose End
90° Drill/Mill, Engraving & Spot Drill

To play, press and hold the enter key. To stop, release the enter key.

ALUMI BN_edited

ALUMI ZrN DLC_edited

ALUMI ROUGHING A_edited

ALUMI ROUGHING_edited

ALUMI_edited

ALUMI BN_edited

ALUMI ZrN DLC_edited

ALUMI ROUGHING A_edited

ALUMI ROUGHING_edited

ALUMI_edited

EXTREME PRODUCTION. HIGH EFFICIENCY.

The AlumiMax Series is purpose-built for high-speed, high-efficiency aluminum machining in both medium/roughing and medium/finishing applications that combine advanced geometries with premium materials and coatings to deliver exceptional chip control, reduced built-up edge, and a superior surface finish - with or without chipbreaker.

2 & 3 Flute
Uncoated, ZrN & DLC Coated
Square & Corner Radius End, Ball Nose
36° & 45° Helix
w/ Chipbreaker & w/o Chipbreaker
Ultra Premium Micrograin Carbide

G (8).png

Not seeing what you need? Let's connect!

Thanks! Message sent.

Sign up. Stay connected.

Product Categories

Manufacturers | Brands

HEAD OFFICE

216A Arvin Avenue, Stoney Creek, ON, L8E 2L8

1 (905) 664-2644

info@emprecise.com

Accessiblity Customer Service Plan

© Copyright 2026 E.M. Precise Tool Ltd. All Rights Reserved.

bottom of page