top of page
ALUMIMAX SPEEDS N FEEDS (1).png
AlumiMax - P.png
AlumiMax - P (1).png
AlumiMax - P (2).png
AlumiMax - P (3).png
AlumiMax - P (4).png
AlumiMax - P (5).png
EMPT CA (4)_edited_edited_edited_edited.
EMPT CA (4)_edited_edited_edited_edited.
EMPT CA (4)_edited_edited_edited_edited.

​​​​​KEY BENEFITS​

​

Honed Cutting Edges: All tools are honed to extend tool life

and improve cutting performance​

​

Solid Carbide Construction:

Manufactured from Ultra Premium Micrograin Solid Carbide​

​

36° Helix Angle (Roughing) & 45° Helix Angle (Finishing):

Ideal for high-speed, high-efficiency milling

​

Broad Application Range:

Suitable for slotting, profiling, side milling, and light roughing in CNC and

manual milling setups.

​

​​Wide Range of Sizes & Configurations:

  • Cutting diameters from 1/4" to 1"

  • Length of Cut from 1/16" to 3" 

​

Geometries for Every Application - Centre Cutting | Round Shanks:

  • Square & Corner Radius End – 2 & 3 Flute | w/ and w/o Chipbreaker

  • Ball Nose End – 2 & 3 Flute

​

Coating Options:

  • Uncoated – Ideal for soft, gummy aluminum

  • ZrN Coated – Provides high lubricity and reduced built-up edge

  • DLC Coated – Ultra-low friction and maximum wear resistance

The AlumiMax Series is purpose-built for high-speed, high-efficiency aluminum machining in both medium/roughing and medium/finishing applications that combine advanced geometries with premium materials and coatings to deliver exceptional chip control, reduced built-up edge, and a superior surface finish.

​

A unique combination of variable pitch and variable helix, polished flute surfaces, and chipbreaking geometry allows for aggressive material removal with minimal vibration. Each tool is manufactured and finished with a unique honing and polishing process to enhance cutting edge and extend tool life and maximize consistency.​

ALUMI (1).png

Series / AlumiMax Series

EXTREME PRODUCTION.  HIGH-EFFICIENCY.

SQUARE & CORNER RADIUS END - Medium/Roughing

  • 3 Flute

  • Uncoated & ZrN Coated

  • 36° Helix

  • Round Shanks

SQUARE & CORNER RADIUS END - Medium/Finishing

  • 2 & 3 Flute

  • Uncoated, ZrN & DLC Coated

  • 45° Helix

  • Round Shanks

BALL NOSE

  • 2 & 3 Flute

  • Uncoated & ZrN Coated

  • Round Shanks

  • Fractional Sizes

No products to show here

EMPT CA (4)_edited_edited_edited_edited.
EMPT CA (4)_edited_edited_edited_edited.

HIGH PERFORMANCE. PRECISION. STABILITY.

The High Performance Series is engineered for superior performance in demanding applications, featuring variable pitch geometry to significantly reduce chatter and vibration. All HP Series undergo a unique honing process to improve edge integrity and finish quality with specially designed core and heel geometry to enhance rigidity and minimize tool deflection for consistent, accurate results.

  • ​​4 & 5 Flute

  • TiALN Coated

  • Square & Corner Radius End

  • Ball Nose

  • Long Reach Neck Relief

HP Ultra Series (1).png

ULTIMATE TOOL LIFE. MAXIMUM PERFORMANCE.

The High Performance Ultra & HEM Series combines advanced engineering to deliver maximum tool life, precision and productivity. Built for the most demanding production environments. Manufactured to ensure exceptional wear resistance and cutting performance. HEM (High Efficiency Milling) Series for Dynamic and Trochoidal Milling.

  • ​​4, 5, 6 & 7 Flute

  • TiALN & ALL4 Coated

  • Square & Corner Radius End

  • Ball Nose​

  • Ultra Premium Micrograin Carbide

HTAS.png

BUILT FOR HEAT.  ENGINEERED FOR EXTREMES.

The High Performance Ultra HTAS (High Temp Alloys & Stainless) Series is built to conquer extreme heat and work-hardening materials. Advanced geometry and high-performance coating deliver superior thermal stability, longer tool life, and consistent precision in demanding production. Engineered for exceptional wear resistance, reduced deflection, and optimized chip control in stainless steels and high-temperature superalloys.

  • ​​4, 5, 6 & 7 Flute, ALL4 Coated

  • Square & Corner Radius, Ball Nose End

  • w/ Chipbreaker & w/o Chipbreaker

  • Ultra Premium Micrograin Carbide

GP Series (1).png

VERSATILITY meets PERFORMANCE & DURABILITY.

The General Purpose Series embodies our commitment to quality and performance in general-purpose milling designed to excel across a wide range of materials. Precision Grinding with high quality surface finishes for maximum tool life, delivering cost-effective, reliable and economical solutions for everyday general-purpose milling and machining applications.

  • 2, 3 & 4 Flute

  • Uncoated, TiALN & TiN Coated

  • Square & Ball Nose End

  • Double Square End & Double Ball Nose End

  • 90° Drill/Mill, Engraving & Spot Drill

AlumiMax (1).png

EXTREME PRODUCTION. HIGH EFFICIENCY.

The AlumiMax Series is purpose-built for high-speed, high-efficiency aluminum machining in both medium/roughing and medium/finishing applications that combine advanced geometries with premium materials and coatings to deliver exceptional chip control, reduced built-up edge, and a superior surface finish - with or without chipbreaker.

  • 2 & 3 Flute

  • Uncoated, ZrN & DLC Coated

  • Square & Corner Radius End, Ball Nose

  • 36° & 45° Helix

  • w/ Chipbreaker & w/o Chipbreaker

  • Ultra Premium Micrograin Carbide

G (8).png

Not seeing what you need?  Let's connect!

Thanks! Message sent.

Sign up.  Stay connected. 

bottom of page